THINGS
TO KNOW
BEFORE
CONNECTING
COMPONENTS
Protect Your Components
from Power Surges
•
Connect all components before plugging any power
cords into the wall outlet.
•
Always turn off the TV and other components before
you connect or disconnect any cables.
V
V
Position
Cables
Correctly
to Avoid
Audio
Hum or
Interference
Insert all cable plugs firmly into their jacks.
Place the audio/video cables to the sides of the TV's back
panel instead of straight down the middle after you
connect your components.
Try not to coil any twin-lead cables and keep them away
from the audio/video cables as much as possible.
Make sure all antennas and cables are properly
grounded. Refer to the Safety Tips sheet packed with
your unit.
Protect
Your
Components
from
Overheating
•
Do not block ventilation holes in any of the components.
Arrange the components so that air can circulate freely.
•
Do not stack components.
•
Allow adequate ventilation when placing your
components in a stand.
•
Place an amplifier
or satellite
receiver on the top shelf of
the stand so heated
air rising from it will not flow
around
other components.
6
V
V
V
CONNECTIONS
43