Table of Contents
Advertisement
The VCR will only respond to the compatible
remote's VCR2,
VCR2,LD, or DVD,VCR2 button.
If you change the remote
setting to VCR2, the remote that came with your VCR will no
longer control it.
Use the compatible
remote to change the remote setting
back to VCR1. Display the PREFERENCES menu, press 1, and
then press VCR on the VCR's remote.
AUTO
PLAY
This feature allows the VCR to automatically
start playing
when you insert a tape with the safety tab removed.
Press 2
to switch between ON or OFF.
Select ON if you want a tape with its safety tab removed
to start playing automatically
when the tape is inserted.
Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.
AUTO
TV/VC
R
This feature controls whether
the TV/VCR switch changes
automatically
to the VCR mode, when the VCR is turned on.
Press 3 to switch between ON and OFF.
Select ON if you want the VCR to switch to the VCR mode
when the VCR is turned on or a cassette is inserted. This
only applies if you connect the ANTENNA IN and OUT
jacks of your VCR and TV and watch your VCR on channel
3 or 4 of your T_.
Select OFF if you want the VCR to remain in the TV mode.
This is useful if you watch your VCR on the TV's video
input and you don't want your antenna/cable
signal
interrupted
by the VCR.
Auto TV/VCR
Pressing TV-VCR on the remote
will still switch between the VCR
and TV mode.
VCR mode: VCR indicator in the
display panel lights.
TV mode: VCR indicator turns off.
17
Advertisement
Table of Contents
