Table of Contents
Advertisement
MENU
Brings up VCR MAIN MENU on the TV screen. Used to
select a menu item or exit a menu.
Numbers
(0 through
9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding
1 until 1 --
appears on the screen. Then press the other
two numbers.
OFF Turns off the VCR when the remote is set to control the
VCR. Turns off other components
if remote is programmed.
PAUSE Pauses playback or recording.
Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
RECORD Starts VCR recording. Also used for express recording.
REVERSE Rewinds the tape when the VCR is stopped. Searches
backward through
a tape during playback. Starts slow-motion
playback when tape is paused. Decreases speed during slow-
motion playback.
SEARCH Displays MOVlEI_,ADVANCE,
Index, and Zero Search
menus on TV screen when VCR is stopped. Advances the tape 60
seconds of recorded material during playback.
SPEED Selects a recording
speed (SP or SLP).
STOP Stops the current VCR function
such as record, playback,
rewind, or fast forward.
TRACKING Up or Down
Lets you manually reduce the streaks
that may appear on the picture during play, slow motion,
or
pause. Reduces picture "jitter"
during stop-action
playback.
TV.VCR
Switches the picture signal so that it either comes from
the VCR or cable/antenna
system.
TV FUNCTION
BU'I-I"ONS
CHAN Up or Down
Selects next higher or lower channel in the
TV's channel memory.
CLEAR Removes menus or status displays from the screen.
GO BACK Switches between two channels. Select one channel
and then select another
using the number buttons.
Press GO
BACK to switch between the two channels.
INFO
Shows the TV's status displays on the TV screen.
MUTE
Reduces volume to minimum
level.
I
TV Buttons
This remote may not be able to
control all features of all models of
RCA0ProScan, and GE TVs.
21
Advertisement
Table of Contents
