ProScan PS60690 User Manual page 52

AUTO TUNING
Leads to a menu that lets you set up the TV to automatically tune to
the correct input channel when you press VCR1, VCR2-LD, or
DSS.CABLE.
Set VCR 1 Channel
Lets you select the channel that the TV tunes to when you press the
VCRI button. The choices are:
Not Connected Choose this if you do not have a VCR connected to an
antenna or Video input on the back of the TV, or if you don't want the
TV to tune to a channel when the VCR1 button is pressed.
Channel 3 Antenna A Choose this if your VCR is connected to the
Antenna A jack on the back of the TV, and you want the TV to tune to
channel 3 when you press the VCR1 button. Reminder: Make sure the
component's Ch 3/4 switch is set to channel 3.
Channel 4 Antenna A Choose this if your VCR is connected to the
Antenna A jack on the back of the TV, and you want the TV to tune to
channel 4 when you press the VCR1 button. Reminder: Make sure the
component's Ch 3/4 switch is set to channel 4.
Channel 3 Antenna B Choose this if your VCR is connected to the
Antenna B jack on the back of the TV, and you want the TV to tune to
channel 3 when you press the VCR1 button. Reminder: Make sure the
component's Ch 3/4 switch is set to channel 3.
Channel 4 Antenna B Choose this if your VCR is connected to the
Antenna B jack on the back of the TV, and you want the TV to tune to
channel 4 when you press the VCR1 button. Reminder: Make sure the
component's Ch 3/4 switch is set to channel 4.
Video I Input Choose this if your VCR is connected to the Video 1
jacks on the back of the TV, and you want the TV to tune to Video I
input when you press the VCR1 button.
Video 2 Input Choose this if your VCR is connected to the Video 2
jacks on the back of the TV, and you want the TV to tune to Video 2
input when you press the VCR1 button.
Video 3 Input Choose this if your VCR is connected to the Video 3
jacks on the back of the TV, and you want the TV to tune to Video 3
input when you press the VCR1 button.
48
Parental Control
I-Ill