To Control A Laserdisc Player; To Control An Audio Component - ProScan PS60690 User Manual

Programming the Universal Remote
to Control a Laserdisc Player
Use the codes in the code list on the right or on the sheet packed with
your remote. However, this remote may not operate all models of the
brands that are shown in the code list on the right.
Follow these steps to program your universal remote to control your
laserdisc player:
1. Turn on the laserdisc player.
2. Look up your brand and code number(s) in the code list.
3. Press and hold the VCR2 • LD button on the remote.
4. Enter the two-digit code from the code list.
5. Release VCR2. LD, then press POWER to see if the laserdisc player
responds to the remote commands. If it doesn't, try pressing
VCR2 • LD, then POWER again.
6. Repeat steps 3 through 5 using the next code listed for your brand
until the [aserdisc player responds to the remote commands.
Programming the Universal Remote
to Control an Audio Component
To program the remote for a remote-controllable audio component,
point the remote at the component and press the correct component
button: AUX for an AV receiver, CD for a CD player, etc. Then, press
POWER or CHAN up or down. If the component doesn't respond, the
remote needs to be programmed. Use the codes in the code list on the
next page or on the sheet packed with your remote. However, this
remote may not operate all models of the brands that are shown in the
code list.
Follow these steps to program your universal remote to control your
audio component:
1. Turn on the component to be programmed.
2. Look up your brand and code number(s) on the code list.
3. Press and hold the component button on the remote.
4. Enter the two-digit code from the code list.
5. Release component button, then press POWER to see if the
component responds to the remote commands. If it doesn't, try
pressing the component button, then POWER again.
6. Repeat steps 3 through 5 using the next code listed for your brand
until the component responds to the remote commands.
Laserdisc Player Codes
ProScan............................................. 033
RCA ................................................... 033
Pioneer .............................................. 033
26