ProScan PS60690 User Manual page 53

Set VCR2, LD Channel
Lets you select the channel that the TV tunes to when you press the
VCR2 °LD button. The choices are the same as those listed under Set
VCR I Channel, except that the component is the second VCR or
laserdisc player, and the remote button being programmed is
VCR2.LD. For example:
Video 2 Input Choose this if your second VCR or laserdisc player is
connected to the Video 2 jacks on the back of the TV and you want
the TV to tune to Video 2 input when you press the VCR2°LD button.
This is a typical setting for a second VCR or laserdisc player.
Set DSS,CABLE Channel
Lets you select the channel that the TV tunes to when you press the
DSS°CABLE button. Usually, DSS°CABLE can control either a DSS
receiver connected to the Video I input jacks or a cable box
connected to the Antenna A jack.
The choices are the same as those listed under Set VCR I Channel,
and include Channel 2 Antenna A and Channel 2 Antenna B. Also, the
component is either a DSS Receiver or a cable box, and the button
being programmed is DSS°CABLE. For example:
Video I Input Choose this if your DSS Receiver is connected to the
Video I jacks on the back of the TV and you want the TV to tune to
Video I input when you press the DSS°CABLE button. This is the
typical setting for a DSS Receiver.
The following is an example for a cable box:
Ch 3 Antenna A Choose this if your cable box is connected to the
Antenna A jack on the back of the TV and you want the TV to tune to
channel 3 when you press the DSS,CABLE button. This is a typical
setting for a cable box.
49