Table of Contents
Advertisement
Connections
& Setup
Connection: TV + VCR + Satellite Receiver
1°
Connect
your Satellite
Receiver
to your "IV
A. Connect
the audio/video
cables.
Connect
the audio
cables
(white
and red)
to the
AUDIO
IN jacks
on the back of the TV _R and L) and
to the Audio
Output
Jacks
on tbe
Satellite
Receiver.
B. Cmmect
the video
cable
(yellow)
to the VIDEO
IN jack
on the back oftbe
TV and
to the
Video
Output
Jack
on tile satellite
receiver.
2.
Connect
coaxial
cables
to the Satellite
Receiver
A. Connect
the coaxial cable from your cable ontlet, cable box, or antenna
to the Input
Jack on your satellite receiver
(sometimes
labeled IN FROM ANT).
B. Connect
the coaxial
cable
from
your satellite
dish antenna
to the Input
Jack on your
satellite
receiver
(sometimes
labeled
SATELLITE
IN).
3.
Connect
the Satellite
Receiver
to the VCR and to the TV
A. Connect
a coaxial cable to the Output Jack (sometimes
labeled OUT TO TV) on the
satellite receiver and to the Input Jack on the VCR (sometimes
labeled IN FROM ANT).
B. Connect
a coaxial
cable
to the
Output Jack
on the VCR (sometimes
labeled
OUT
TO
TV) and
to the CABLE/ANTENNA
jack
on the TV.
4°
Connect
G-LINK
cable
A. If you haven't
done
so, remove
the Demo
Pin from
the G-LINK jack.
B. Connect
the G-LINK
cable
to the G-LINK jack
on the TV. Next
step, place
one of the
wands
of the G-LINK
cable
to work with your VCR
(instructions
are on p. 13).
Go to page 13
Chapter
1
11
Advertisement
Table of Contents
