Table of Contents
Advertisement
The VCR will only respond to the compatible
remote's VCR2,
VCR2oLD, or VCR2oDVD button.
If you change the remote
setting to VCR2, the remote that came with your VCR will no
longer control it.
Use the compatible
remote to change the remote setting back
1:oVCR1. Display the PREFERENCESmenu, press 1, and then press
VCR on the VCR's remote.
,AUTO
P LAY
This feature allows the VCR to automatically
start playing when
you insert a tape with the safety tab removed. Press 2 to switch
between ON or OFF.
Select ON if you want a tape with its safety tab removed to
start playing automatically
when the tape is inserted.
Select OFF if you do not want a tape with its safety tab
removed to start playing automatically.
AUTO
TV/VC
R
This feature controls whether
the TVNCR switch changes
automatically
to the VCR mode. Press 3 to switch between
ON
and OFF.
Select ON if you want
the VCR to switch
to the VCR mode
when
the VCR is turned
on or a cassette
is inserted.
This only
applies
if you connect
the IN FROM ANT. and OUT TO TV
jacks
of your
VCR and TV and watch
your
VCR on channel
3
or 4 of your
T_.
Select OFF if you want the VCR to remain in the TV mode.
This is useful if you watch your VCR on the TV's video input
and you don't want your antenna/cable
signal interrupted
by the VCR.
Auto
TV/VCR
Pressing TV-VCR will still switch
between
the VCR and TV mode.
VCR mode: VCR indicator
in the
display panel lights.
TV mode: VCR indicator
turns off.
21
Advertisement
Table of Contents
