Table of Contents
Advertisement
TAPE EJECT
Press EJECTon the VCR when it is stopped to eject the tape.
RECORDING
If you want to record something
that you're watching,
you can
use basic recording.
1.
Set the tape speed by pressing the SPEEDbutton
on the
remote (see "Tape Speed" in Setting Up the VCR section for
information
about tape speed settings).
2.
Press the RECORD button to begin recording.
3.
Press STOP to stop recording.
If you just want to pause the recording for a short time
(like during a commercial),
press PAUSE instead of STOR
CHECK THE SAFETY TAB
No matter which recording
option you use, you need to make
sure there is a tape in the VCR, and that the tape's safety tab is
in place. You cannot record on a tape with the safety tab
removed.
\
Safety Tab
If the safety tab is removed and you want to record over it,
simply cover the hole with vinyl tape.
27
Advertisement
Table of Contents
