Table of Contents
Advertisement
MENU
Brings up VCR MAIN MENU on the TV screen.
Numbers
(0 through
9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding
1 until 1 - - appears on the screen. Then press the other
two numbers.
PAUSE Pauses playback or recording.
Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
POWER Turns the VCR off.
RECORD Starts VCR recording. Also used for express recording.
REV Rewinds the tape when the VCR is stopped. Searches
backward through
a tape during playback. Starts slow motion
during
play-pause and decreases slow-motion
speed.
SEARCH Displays MOVlE_ADVANCE
screen for prerecorded
movies or displays Index, Zero, and Blank Search menus on TV
screen. Starts COMMERCIAL_ _ADVANCE skipping during
playback.
SLOW + and - Used for slow-motion
playback. Press + to
increase the speed or- to decrease the speed.
SPEED Selects a recording
speed (SP or SLP).
STOP Stops the current VCR function
such as record, playback,
rewind, or fast forward.
TRACKING Up or Down
Lets you manually reduce the streaks
that may appear on the picture during play, slow motion,
or
pause. Reduces picture "jitter"
during stop-action
playback.
TVoMCR Switches the picture signal so that it either comes from
the VCR or cable/antenna
system.
TV FUNCTION
BUTTONS
CHAN Up or Down
Selects next higher or lower channel in the
TV's channel memory.
CLEAR Removes menus or status displays from the screen.
GO BACK Switches between two channels. Select one channel
and then select another
using the number buttons. Press GO
BACK to switch between the two channels.
INFO Shows the TV's status displays on the TV screen.
TV Buttons
The TV buttons may not control all
|
features of all models of RCA,
ProScan/
• and GE TVs.
J
25
Advertisement
Table of Contents
