To Search For A Desired Frame - Pioneer LaserDisc CLD-D504 Operating Instructions Manual

I
TO SEARCH FOR A DESIRED FRAME
[TI I-_ ITI I-_
Q
r
t_ c5_
Q
This function is available on LDs only.
With a CAV (standard play) disc, a desired image can be searched
by specifying the frame number (refer to page 7 for definitions).
This function is available on LDs only.
With a CLV (extended play) disc, a desired image can be searched
by specifying the time number (refer to page 7 for definitions).
(Example) To search the image at frame No.
1234:
1. Press CHP/TM during playback.
CHPiTM
2. Press numeric buttons 1, 2, 3 and 4.
3. Press •.
PLAY
The specified frame is searched and a still image is dis-
played.
• Press I,- again to restart normal playback.
(Example)
To
search the image at 12 min, 34
sec.:
1. Press CHP/TM during playback.
CHP/TM
%
2. Press numeric buttons 1, 2, 3 and 4.
DDDD
3. Press •.
__- PLAY
Playback restarts from the specified time number.
• With a disc which does not contain time information in sec-_
onds, specify the time in mlhutes (2 digits). |
• If the time number or frame number specified is greater_
than the last number on the disc, the player pauses at the I
end of the disc.
19
<VRB1147>