Download Print this page

Connections - Pioneer LaserDisc CLD-D504 Operating Instructions Manual

Cd cdv ld player
Hide thumbs

Advertisement

CONNECTIONS
Connection with a TV set equipped with Video/Audio
inputs
Connection
method
(Be sure to plug the cords securely
deep into the connectors.)
Connect
the VIDEO OUT jack
of the player
to the video
input jack
of an A/V
TV (or a TV monitor).
If the TVset has an S VIDEO input jack, connect it using an S VIDEO cable which is available in audio/video stores.
For use of the S VIDEO cable, also read the operating instructions of the TV,
Connect
the AUDIO
OUT ]acks
of the player
to the audio
input ]acks of the A/V
TV.
If the audio of your TVis monaura!, connect the AUDIO (monaural) output jack of the player to the audio input jack of the TV.
Finally
plug the power
cord into a household
power
outlet
(which
should
permanently
be supplied
with power).
Also read the instruction manual of the TV.
........
O
Check
the p ositions
of the holes of the S
_'_
Provided Audio cord
Commercially-available
• _
VIDEO jack before
_
I
/
audio cord
_._o_
inserti°n"
1
,,,
¥
'
lu
i
S VIDEO p g
.......
..........
I -
_ck
AUDIO input jack (mono TV)
m
Provided Video cord
VIDEO input jack
AUDIO input jacks (AN TV)
I
Connection of an additional stereo amplifier
I
This connection
scheme shows how to connect the audio output to a stereo amplifier while the video output is connected to a TV using one of
the schemes shown above. To reproduce the audio of a Compact Disc or an LaserDisc with improved quality, it is recommended
to connect
the player to a stereo amplifier.
Connect
the
AUDIO
OUT
jacks
to the
input
jacks
labeled
LD, CD or AUX,
etc. (Never
connect
to the
PHONO
input
jacks.)
Also read the operating instructions
of your stereo amplifier.
Plug into a wall
outlet after
completing
all
connections,
Comme[c_a\l_/-
available
audio cord
8
<VRB1147>
Commercially-available
mini-plug
cord
_without
_oad_
.'ONTROL OUT jack
(PIONEER stereo amp)
Stereo amplifier
_11Combination
with a PIONEER component _
with
the
_
mark
Wher_
the
_3\a_/er
ts
combined
w_th
a
component
capab\e
o_
centralized
control
of
PIONEER
products
carwing
the
_
mark
(optional AV surround
amplifier, etc.), it is possible to control
the entire system.
Using a resistorless cord with mini-plugs
(without
load) on
both ends that is available in audio stores, connect the CON-
TROL IN jack of the player to the CONTROL OUT jack of the
component.
For the connection
and operation methods, read the oper-
ating instructions
of the component
to be connected.
Once the system remote control connection
is made, the
remote control
sencer of the player wilt not accept the
remote control. The remote control unit should be pointed
at the remote control
sensor of the connected
compo-
nent.
J

Hide quick links:

Advertisement

loading

  Also See for Pioneer LaserDisc CLD-D504

  Related Manuals for Pioneer LaserDisc CLD-D504

This manual is also suitable for:

Cld-ds04