Connection with a TV set equipped only with an antenna terminal
Using the optional RF modulator (model JA-RF3L), connect the VHF ADAPTER terminal of the player to the antenna terminal.
Set the channel settings of the RF modulator and -IV to the same channel.
When the power of the player is switched
on, the LD/CDV/CD playback screen appears. The TV audio is in monaural.
Switch off the power of the player when watching
With this connection scheme, it is not possible to watch a broadcast TV program while playing an LD/CDV/CD.
read the Instruction
of the JA-RF3L.
With some TV sets, stripe noise may be observed on the TV screen when an LD is played. In this case, move the antenna cable away from
the power cord until the noise disappears.
(_AC-3 RF OUT terminal :
This terminal is intended for use with Dolby AC-3 compo-
nents (.1) planned for future release. With this terminal,
you will be able to connect an AC-3 RF input of amplifiers
laser discs for-
matted with Dolby AC-3 1,2).
(* 1) }ndicated w_th ,DI_j_
(*2) Indicated with _
You cannot playback
laser disc players, AV amplifiers,
etc., with this termi-
Do not connect this terminals to the audio input termi-
nal of a normal stereo or AV amplifiers.