Table of Contents
Advertisement
Connecting Your TV
Cable-TV
Connections
Follow one of these steps to connect a cable-TV system to your TV instead of a home antenna. Since cable-TV systems
vary, you may Wish to consult your local cable-TV company for additional information.
A
Follow this diagram ff your cable company does not require a cable box (no scrambled channels):
m
_ble
_
I
of
TV
B
Follow this diagram if your cable company requires a cable box that can be controlled by remote control:
A_fl'i[tlmA
,m,n0 .--
W
Cable
r
"iV
Rememberto tune yourTV to the
outputchannelof the cable box (usually
2, 3, or4) whenselecting channelsvia
the cablebox.
C
Follow this diagram if your cable company requires a cable box that cannot be controlled by remote control:
Incoming
(_)
Cable
®
©
©
Note: These optionalaccessories (2-way
,puu=__JB s_Q_
and a _ _al
cables(_)) areavailableas a kit under
#AHO41BL.*
The "A" position on the A/B switch lets you select all
non-scrambled channels by the TV's remote.
The "B" position allows you to select scrambled channels
via the cable box. Remember to tune your TV to the
output channel of the cable box (usually 2, 3, or 4)
when selecting channels via the cable box.
* optional accessories are available from most dealers or electronics supply stores.
15
Advertisement
Table of Contents
