GE 09GP110 Manual page 5

Getting Started
First-Time Operation
5, Turn on TV and place channels
in memory.
Your TV is designed to place active
channels into your TV's memory the first
time you turn it on.
I -- I l,,,l_ I
I:_11, _ llse.,
0@0
• Press POWER on the "IV or remote to
turn on the TV.
• The TV automatically cycles through all
channel numbers and places active
channels into the channel memory.
When your TV is finished, it tunes to
the lowest channel number in its
channel memory.
6.
Edit the channel memory,
You can add and erase channels from
memory as desired.
• Press MENU repeatedly to highlight
SETUP. Then press + to select the
SETUP menu.
• Press MENU repeatedly to highlight
EDIT CHANNELS.
Press MKVU
repeatedly to
see 2nd setup
m_lU.
• Press + to select EDIT CHANNELS.
• Select the desired channel number by
pressing the CHAN up or down button
or by pressing two number buttons.
7. Set the dock.
• Press MENU repeatedly until SETUP is
highlighted. Then press + to select the
SETUP menu.
• Repeatedly press MENU to select
CLOCK.
• Press and hold- to set the correct hour.
Then press and hold + to set the correct
minutes.
• Press CLEAR to remove the menu from
the screen.
• Then press + to add a channel, or
press- to erase a channel. Details
are on page 12.
• Press CLEAR to remove the menu from
the screen.
3