Sleep Timer Operation - GE 09GP110 Manual

Operating Features
Sleep Timer Operation
By setting the Sleep Timer, you can
program your TV to turn itself off
after a certainperiod of time (up to
four hours). This is useful whenever
you want to watch TV for an hour or
so before going to sleep.
Setting the Sleep Timer
1. Press MENU until SETUP is high-
lighted. Then press + to select the
SETUP menu.
4. When the Sleep Tarter is turned on, the
letters SLP appear on the screen
whenever you change channels or
stations or press DISPLAY.
2. Press + to select the length of time you
want the TV to stay on. Each press of
the + button adds 30 minutes. The
timer can be set to run for up to four
hours. Each press of the- button
subtracts 30 minutes.
5. Repeat step 1 to see the amount of time
remaining before the TV shuts itself off.
32 minutes
remaining
3. When finished, the display disappears
from the screen in a few seconds. To
make it disappear more quickly, press
CLDgR on the remote.
6. When the Sleep Timer counts down to
one minute, the Sleep Thner display
appears on the screen. When this
display appears, press CLEAR to cancel
the Sleep Tuner if you want the TV to
remain on.
Cancelling Sleep Timer
Press MENU until SETUP is high_ghted.
Then press + to select the SETUP menu.
Press the - button until the screen
shows "-:- -".
10