Sleep Timer Operation - GE 13GP243 Manual

Operating Features
Sleep Timer Operation
By setting the Sleep Timer, you can
program your TV to turn itself off
after a certain
period
of time
(up to
four hours). This is useful whenever
you want to watch TV for an hour or
so before going to sleep.
Setting the Sleep Timer
1. Press MENU until SETUP is high-
lighted. Then press + to select the
SETUP menu.
4. When the Sleep Tuner is turned on, the
letters SLP appear on the screen
whenever you change channels or
stations or press DISPZAY.
2. Press + to select the length of time you
want the TV to stay on. Each press of
the + huron adds 30 minutes. Each
press of the - button subtracts 30
minutes.
5. Repeat step I to see the amount of time
remaining before the TV shuts itself off.
32 minute_
remaining
3. When finished, the display disappears
from the screen in a few seconds. To
make it disappear more quickly, press
CLEAR on the remote.
6. When the Sleep Timer counts down to
one minute, the Sleep Timer display
appears on the screen. When this
display appears, press CLEAR to cancel
the Sleep Timer if you want the "IV to
remain on.
Cancelling Sleep Timer
Press MENU until SETUP is highlighted.
Then press + to select the SETUP menu.
Press the - button until the screen
shows "-:- -".
#
10