Table of Contents
Advertisement
Bsnd
Hish
......
J
Mid.
I
....
J
LON
....
]
Your
tape
is
rated:
Averaee
_xcellent
VCR
Per£ecTape
U_e ENTER to start
Load a tape thathas not been recordedintothe VCR.
The VCR willdisplaythe testing statusscreen. When testing,
theVCR recordsforone second,then evaluatestherecording
itmade. The entire testtakes about eightseconds. During
thistime,the "PT" light on the frontpanel willflash. Ifyou
wish tocancelthe test, pressthe STOP buttonon the remote
control while the"PT" light isstill f lashing.
When the test is finished,
the VCR will display
the rating
of
your tape for eight seconds.
On the front panel, the "PT" light
will shine steadily,
indicating
that the VCR has set its inter-
nal circuitry to make the best possible
recording
on this tape.
usingPerfecTape
T M
manually
Load a tape that has its erasure
tab intact
into the VCR.
Find a portion
of the tape that is OK to record over; this
feature
will record over one second of your tape.
Press the VIDEO button
on the remote
control. You will see
thevideofunction menu.
Press the VIDEO button
until the PerfecTape
function
ap-
pears.
O
Turn the shuttle
ring right on the remote
to begin the test.
The VCR will display
the testing
status
screen. When testing,
the VCR records
for one second, then evaluates
the recording
it made. The test takes about eight seconds. During
this time,
the "IYlY ' light on the front panel will flash. To cancel the test,
press the STOP button
on the remote control
while the "PT"
light is still flashing.
When the test is finished,
the VCR will display the rating
of
your tape for eight seconds.
On the front panel, the "PT" light
will shine steadily,
indicating
that
the VCR has set its inter-
nal circuitry
to make the best recording
on the tape. You can
quickly turn off the display
by pressing
the STOP on the
remote
control.
Should you wish to erase the settings,
eject the tape. The
settings
will also be erased
if you press the TIMER RESET
button
or if the VCR loses power.
After the test is finished,
the PerfecTape
function
will not
appear
unless
the tape is ejected.
59
Advertisement
Table of Contents
