Mitsubishi HS-U570 Owner's Manual page 37

Channel No3t 9 £n memory[
_Important:
_>Important:
0
You will see the screen for adding or deleting channels. Use
the ADJUST dial to select the channel that you want to add
or delete. Press the ENTER button or turn the shuttle ring to
the right to add the channel; press the CANCEL button or
turn the shuttle ring to the left to delete it.
O
When you are finished adding or deleting channels, press the
MENU button once to return to the "First Time Set-Up"
menu; press the MENU button a second time to return to the
'_VCR Main Menu'; press the MENU button a third time to
turn offthe menu.
If you use automatic programming again, you will lose all of the
manual changes you made. All of the channels you deleted will be
added; all of the channels you added will be deleted. If you are
using a cable box that receives only one or two digit channels, you
cannot add a three-digit channel.
Selectinga channel
Now that you have programmed your channels, and added or
deleted some, you will want to be able to select channels. (If you
have not yet programmed your channels, see page 31.)
If you selected indoor/outdoor antenna, the VCR can receive UHF/
VHF channels 2-69. If you selected cable box only, the VCR can
receive cable box channels 0-99. If you selected cable antenna,
the VCR can receive cable channels 1-125. If you try to select a
channel number that the VCR cannot receive, the VCR will not
change channels. If you are using a satellite receiver, you cannot
select cable channels 100-125.
Also, your VCR can select all of the channels of your Sony, RCA,
or PRIMESTAR ®satellite receiver. If you are using an RCA or a
Sony receiver, you can select channels 100-999. If you are using a
PRIMESTAR ® receiver, you can select 1-999 channels. If you
select a channel coming from an RCA or Sony receiver, your
receiver will automatically turn on.
There are two basic ways to select channels: sequentially or
directly. You can also use the super quick view memory.
selecting channels sequentially
Press theCHANNEL buttonson the remote control or on the
VCR frontpanel. This will cyclethrough the channelsin sequen-
tial numerical order. Ifyou have connectedyour VCR toa satel-
lite receiver, t helowestnumbered satellite channel comes after
the highestnumbered VCR channel.Ifyou have connectedyour
VCR toa satellite receiver, you can change channelsin 10-digit
incrementsby holdingdown the CHANNEL buttonforone
second.
35