Ice Maker; How To Install - LG LRTGC1815BK Service Manual

7. ICE MAKER
7-1. HOW TO INSTALL WATER PIPE
• Before Installation
1. The icemaker requires the water pressure of 1.5 -
8.5kgf/cm z. (It is acceptable if city water fills a cup of
180cc with water for 3 seconds)
2. Install booster pump where the city water pressure is
below 1.5kgf/cm 2 for normal operation of Ice Maker.
3_ The total length of water pipe shall be less than lOm. Do
not bend the pipe at right angle. If the length Lsmore
than 1Om. there wilt be troubles on water supply due to
water pressure drop.
4. Please install water pipe where there is no heat around,
7-1-1. When connecting directly to the water tap.
• Please confirm the following installation parts.
Valve Feed Rubber. Packing Connector, Pipe
Connector Pipe Tape, Teflon
Class.
Conve-
rlible
Water
Valve
Water
Conn-
ector
Shape and Spec.
Connector, (MECH) Pipe
Nomenclature
Valve Feed
Connector,(MECH) Pipe
ConversionConnector(3/4")
Balance Conector(3/4")
Packing(e24x3t)
4932JA3003B
ConversionConnector(W25)
Balance Conectoor(W25)
Pacldng(¢23x3t)
Connector,(MECH) Pipe
Conversion Connestor0N28 )
BalanceConector(W28)
Packing(¢26x3t)
Connector,(MECH) Pipe
ConversionConnector(l/2")
BalaoceConector(1/2")
Packing(_19x3t)
P/No
5221JA3001A
4932JA3003A
6631JA3004A
6631JA3004B
3920JA3001B
Rema_s
Common Use
No Holes
4932JA3003D
6631JA3004G
6631JA3004H
3920JA3001D
6631JA3004C No Holes
6631JA3004D
3920JA3001A
4932JA3003C
6631JA3004E No Holes
6631JA3004F
3920JA3001C
No Holes