Ice Maker; Opretation Principal - LG LTCS24223B/05 Service Manual

8. ICE MAKER

OPERATION PRINCIPLE AND REPAIR METHOD OF ICEMAKER
8-1 OPERATION PRINCIPLE
8-1-1 Operation Principle of Icemaker
Power On
Start Position
Icemaking
Mode
Harvest
Mode
Fill
Park Position
Test Mode
1. Turning the Icemaker stop switch off (O) stops the icemaking function.
2. Setting the Icemaker switch to OFF and then turning it back on will reset the icemaker control.
‡ Adjusts Ejector to
‡ Waits until water becomes cold after starting the
Icemaking operation.
‡ Runs MOTOR to drop ice from the tray into the ICE BIN.
‡ Performs
the SOLENOID in ICE VALVE.
‡ With the detect lever, checks if the ICE BIN is full.
‡ To operate the TEST MODE, insert pin at hole
located at front, press internal button and hold 3 seconds
The icemaking will run through 3 stages:
Harvest
Water amount
control button
Start Position whit power on.
Icemaking Mode after supplying water by operating
Fill Icemaking .
Power (On/Off) Switch
- 27 -
.