Twin Picture Function - Zenith P60W26 Owner's Manual

Twin picture mode
- AS the name suggests, this m_ spli_ the screen into 2, aUowing 2 _urces to _ shown on
the monitor screen at the same time. _ch _urce is given half the scan.
- Select RG8 input source.
- This _r_tion works only in the following re_lutions;
DTV 4_/720p/10_3i, _ 640x480 (only in Vertical frequency 60 Hz)
- With _IN PICTURE active, not all picture forma_ can _ used for the main/sub picture.
twin picture
Press the twin picture huron.
Each ttme
sele_ ON
<ON>
• To avoid a permanent image
being burned into the screen,
the sub picture will move
amount of video noise at the
bottom or top of the sub pic-
ture. This is norma_
29