Twin Picture Function; Twin Picture Mode - Zenith P60W26 Owner's Manual

Twin picture mode

- As the name suggests, this mode splits the screen into 2, allowing 2 sources to be shown on
the monitor screen at the same time. Each source is given half the screen.
- Select RGB input source.
- This function works only in the following resolutions;
DTV 480p/720p/1080i,
- With TWIN PICTURE active, not all picture formats can be used for the main/sub picture.
twin picture
RGB 640x480 (only in Vertical frequency 60 Hz)
Press the twin picture button.
• Each time you press twin picture or vol buttons, you can
select ON or OFF .
DW F ON
<ON>
DW F OFF
<OFF>
Main picture
Sub picture
G
• To avoid a permanent image
being burned into the screen,
the sub picture will move
every 2 hours.
:Center
Downside
• The sub picture starts in the
G
center position and then
moves as described above.
• You may notice a small
amount of video noise at the
bottom or top of the sub pic-
ture. This is normal.
Upside
Center
29