Using The Remote Control - Zenith P60W26 Owner's Manual

Using the
control
• Open the battery compartment cover on the back
of the remote control and insert the batteries with
correct polarity, match "+" with "+', and match "-"
with ":'
• Install two 1.5V "AA" alkaline batteries.
Don't mix used batteries with new batteries.
Notes for using the remote control
Make sure these are no
obits between the
remote control and its
sensor,
Don't place the remote c_ntroU
near a heater or damp place,
Strong impact on the remote con-
trol may cause operation failure
Signal from the remote control
may be disturbed by sun ligN or
other strong _ight. In this case,
turn the set to other direction.
31