Conferencing Calls - Aastra 480i CT User Manual

IP Phone UI
To transfer a call to another
extension:
1. Connect to the call you wish to
transfer (if not already
connected).
2.Press }.
Tue May 17 10:19am 00:27
L2 Dial
>203
Karen Batz
3.Press a line/call appearance
button followed by the extension
number of the person you wish
to transfer the call to.
4.If you do not wish to transfer the
call, press the line/call
appearance button again to abort
the transfer. This disconnects the
new call, leaving the original call
on hold. To go back to
theoriginal call, press the line/
call appearance button for this
call.
5.To complete the transfer, you can
press } again, or
disconnect by placing the
handset back on hook, pressing
Nor pressing the line/call
appearance button for the active
call.

Conferencing Calls

The 480i CT phone system
supports up to 3 parties (including
yourself) in a conference call.
Note: Your system administrator can
set your conference key to speed-
dial a specific number. Contact
your system administrator for
more information.
IP Phone UI
To create a conference call:
1. Connect to the first party you
wish to include in the conference
(if not already connected).
2.Press G .
Tue May 17 10:19am 00:27
L2 Dial
>203
3.Press a line/call appearance
button followed by the extension
number of the person you wish
to add to the conference.
4.Wait for the new party to answer.
You can consult with the new
party first before adding them to
the conference.
5.If you do not wish to add the new
party to the conference, press the
line/call appearance button for
this call. This disconnects the
new party, leaving the original
call on hold. To go back to the
original call, press the line/call
appearance button for this call.
6.To add the new party to the
conference, press =
again.
/ IP Phone User Guide
17