Nikon COOLPIX P500 User Manual page 73

SCENE-'>_#
Pet
portrait
Use this mode for shooting pictures of dogs or cats. The camera
detects and focuses on the face of a dog or cat. When the
subject is in focus, the shutter is released automatically (Pet
portrait auto release (default setting)) and the camera shoots
three pictures.
• Detected faces are displayed in a double frame indicating the K_
focus area, and when a face is in focus, this double frame _ _,_"_°_?"-/¢_1_
lights in green. _
Up to five pet faces can be detected simultaneously. If the
camera detects multiple faces, the double-frame focus area is _! _o,L,_
displayed around the largest face on the monitor, and single-
frame borders are displayed around the other faces. Fsog
1
Even ifa pet's face is not detected, press the shutter-release button to release the shutter.
- ]f a pet's face is not detected, the camera focuses on the subject at the center of the frame.
• Press the _ (continuous shooting mode) button (_4) to change the continuous settings.
- Single: One picture is shot each time the shutter-rdease button is pressed. When
Single is selected, [] is displayed fora few seconds on the shooting screen.
- Continuous (default setting): In Pet portrait auto release (default setting), the
camera shoots three pictures when it focuses on the detected face (Frame rate: up to
about 1.8 fps when the image quality is Normal and the image size is 1_ 4000x3000).
When pet portrait auto release is not used, the camera shoots about 24 pictures at a rate
of up to about 1.8 frames per second while the shutter-release button is pressed all the
way (when the image quality is Normal and the image size is 1_ 4000x3000). When
Continuous is selected, _ is displayed on the shooting screen.
• Press the multi selector • (_.)) to change the pet portrait auto rdease settings.
- Pet portrait auto release (default setting): When the camera focuses on the detected
face, the shutter is released automatically. When Pet portrait auto release is selected,
is displayed on the shooting screen.
- Off: Press the shutter-rdease button to release the shutten
• Pet portrait auto release is automatically set to Off in the following situations.
- When continuous shooting using pet portrait auto release is repeated five times
- When the camera resumes from standby mode for saving power (_23)
- When the internal memory or memory card becomes full
To continue shooting using Pet portrait auto release, press the multi selector • (___))
and reset.
• The digital zoom is not available.
• AF-assist illuminator (_196) does not light. Button and shutter sounds (_lgg) are disabled.
• in some cases, dogs or cats may not be detected or other animals may be detected,
depending on the distance between the camera and the pet, where the pet is facing, how
fast it is moving, the brightness, and other shooting conditions.
o_
o
oo
1 Offcan be selected, The selfitimer lOs or 2s cannot be used,
2 _ (macro close up) can be selected.
3 Other settings can be selected.
59