Usingchild Lock - Mitsubishi HS-U510 Owner's Manual

UsingyourHS-U510 t o playbacktoanother VCR
I PLAYBACK I
[RECORDING ]
AUDIO OUT L41
AUDIO OUT R----_
OUT
o v
t t'_
VIDEO IN--_ _I}--AUDIO IN L
--AUDIO IN R
O
O
Connect one RCA audio cable to the AUDIO
INPUT terminal on the other VCR. Connect
the other end of this cable to the AUDIO
OUTPUT terminal on the HS-U510 labeled
L. If the other VCR is mono, you need a Y-
adapter to hear audio on both channels.
If the other VCR has stereo inputs, connect
another RCA audio cable to the AUDIO
INPUT terminal of the other VCR. Connect
the other end of this cable to the HS-U510
AUDIO OUTPUT terminal labeled R.
O
O
O
Set the input of the other VCR to "External."
Put a blank tape into the other VCR and
find the place where you want to begin
recording. Press STOP.
Put the tape you want to copy into the
HS-U510 and find the :place from which you
want txl begin cop_dng. Press STOP.
O On the other VCR, p:ress record (REC), and
then PAUSE.
O
O
Connect a video cable tio the VIDEO INPUT
terminal on the other VCR. Connect the
other end of this cable to the VIDEO
OUTPUT terminal on the HS-U510 labeled
VIDEO OUT.
Set the audio monitor on the HS-U510 to
"STEREOY (See page 26.)
On the HS-U510, press PLAY, then PAUSE.
Release the PAUSE bu_ton on both VCRs at
the same time.
When finished, press STOP on both VCRs.
i UsingChild Lock
LOCK light
l -_llT llo2.
_BIII I III
I'¢lI I I III
I Lli-I I'11-1
IH I I.li, I.I I_is
[_Important:
The child lock feature prevents others from _sing your VCR. To
lock the VCR:
Press and hold down the DISPLAY button on the remote
control for about 8 seconds. The LOCK light on the
fluorescent display will light up.
To cancel the child lock, press and hold d_wn the DISPLAY
button for about 8 seconds, until the LOCK light on the
fluorescent display goes out.
You can lock the VCR with the power off, even if the VCR is
standing by for a programmed recording. Ify)u lock the VCR with
no cassette in it, the VCR will not accept a cassette.
59