Mitsubishi HS-U510 Owner's Manual page 56

Chapter 4: Usingthe Advanced Features Searching Techniques (cont.)
[>Important:
VCR Looking
for index+ i
SUII_IIZZ_
REM 1:40
0h20m08s
VCR Looking
for index- 1
REM 1:40
0_20m08s
AdvancedFeatures
Your choices are:
Search to blan
Repeat play
Skip search
Use ADJUST to select.
andENTER°
Press MENU for Main Menu
_Important:
Erase .index mark
Find the section that
includes the index mark
you would like to erase.
Press PLAY.
then press REC
before the index mark.
Press MENU for Main Menu
manualindexmarks
To add an index mark yourself, press the RE,3 button on the
remote control while a tape is. recording or playing.
Index marks must be added at least one minute apart. You
cannot add an index mark to a tape with its erasure tab removed.
When you add an index mark to a playing lm]_e, the sound on the
mono track will turn off.
Tosearchfor anindexmark:
O
Press the INDEX SEARCH "+" button on the remote control
to begin a forward search; press INDEX SEARCH "-" to begin
a search in the reverse direction. The VCR will fast forward or
rewind, and one of two screens will be di,;played on the TV.
Once the VCR finds an index mark, it _11 begin playback
from that point. You cannot begin a se;_rch from still frame.
O
You can press the plus (+) or minus (-) buttons up to 19 times
to search for that many index marks. For example, to find the
third index mark ahead, press the plus (+) button three times.
The on-screen display will count down the number of marks
to be passed before playback begins.
To cancel index search, press PLAY or STOP.
erasingindexmarks
O Make sure the video mute function is on. (See "Using video
mute" on page 31.)
O
O
Press the MENU button on the remote control. The "VCR
Main Menu" will appear on your screen.
Use the JOG/ADJUST buttons to move the cursor next to
"Advanced Features." Press ENTER. ("Advanced Fealmres"
are not available if there is no tape in l_he VCR, or if the VCR
is recording.)
O The "Advanced Features" menu will appear on your screen.
Use the JOG/ADJUST buttons to mow_ the cursor next to
"Erase index mark." Then, press ENTEI_;.
If there is no tape loaded in the VCR, if the VCR is recording, or if
the tape has had its erasure tab removed, you will see an error
message indicating that this feature is not a:vailable. Load a tape
into the VCR, stop recording: or place a piece of tape over the
erasure tab to correct this.
You will see the "Erase index mark _ menu (left). Without
exiting the menus, use the INDEX SEARCH buttons to find
the index mark you wish to erase.
54