Care
and
Cleaning
Self-Clean
Oven
A
Self-Clean
CAUTIONS:
It is normal for parts of the range to become hot during a
clean cycle.
Avoid touching
cooktop,
door, window,
or oven vent
area during a clean cycle.
• To prevent damage to oven door, do not attempt to open
the door when the LOCK indicator
word is displayed.
• Do not use commercial
oven cleaners
on the self-clean
oven finish or around any part of the oven as they will
damage the finish or parts.
The self-clean
cycle uses above normal cooking temperatures
to automatically
clean the entire oven interior.
It is normal for flare-ups,
smoking or flaming to occur during
cleaning
if the oven is heavily soiled. It is better to clean the
oven regularly
rather than to wait until there is a heavy build-
up of soil in the oven.
During
the cleaning
process,
the kitchen
should
be well
ventilated
to help eliminate
normal
odors associated
with
cleaning.
00000000000000000000000000000000001
7b prevent
damage,
do not clean or rub the gasket around
the oven door. The gasket is designed
to seal in heat during
the clean cycle.
Wipe up excess grease or spillovers
from the oven bottom tc
prevent excessive
smoking,
flare-ups
or flaming during the
clean cycle. For ease of cleaning,
the heating
element
can
be lifted slightly (1 to 1 72 inches).
Wipe up sugary and acid spillovers
such as sweet potatoes,
tomato or milk-based
sauces. Porcelain
enamel
is acid re-
sistant, not acid proof. The porcelain
finish
may discolor
iJ
acid spills are not wiped ap prior to a self-clean
cycle.
During Clean Cycle
When the LOCK indicator word lights in the display, the door
cannot be opened. To prevent damage to door, do not lorce
door open when the LOCK indicator
word is displayed.
Some smoke and odor may be detected the first few times the
oven is cleaned. This is normal and will lessen in time. Smoke
may al so occur if oven is heavily soiled or if broiler p an w as
left in oven.
As oven heats, you may hear sounds of metal parts expanding
and contracting.
This is normal and will not damage oven.
Before Self-Cleaning
Turn off the oven light before cleaning
as the light may burn
out during the clean cycle.
Remove
broiler pan, all pans and the oven racks from the
oven. The oven racks will discolor
and may not slide easily
after a self-clean
cycle.
Clean
oven
frame,
door
frame (area outside the door
gasket) and around the open-
ing in the door gasket with a
nonabrasive
cleaning
agent
such as Bon Ami or deter-
gent and water, These areas
are not exposed
to cleaning
temperatures
and should be
cleaned to prevent soil from
baking on during the clean cycle.
After Self-Cleaning
About one hour after the end of the clean cycle, the LOCK
indicator
word will turn off At this point, the door can be
opened.
Some soil may leave a light gray, powdery
ash which can be
removed
with a damp cloth. If soil remains,
it indicates
that
the clean cycle was not long enough.
The soil will be re-
moved during the next clean cycle.
If the oven racks
were left in the oven and do not slide
smoothly
after a clean cycle, wipe racks and embossed
rack
supports
with a small amount of vegetable
oil to restore ease
of movement.
A white discoloration
may appear after cleaning
if acid or
sugary foods were not wiped up betbre the clean cycle. This
discoloration
is normal
and will NOT affect performance.
15
Need help?
Do you have a question about the MER5770AAA and is the answer not in the manual?
Questions and answers