Coil Etement Surface - Maytag MER5770AAA User Manual

Surface Cooking (continued)..............................
Surface Indicator Lights
There is an indicator light under each pair of control knobs.
When one or both of the surface control knobs is turned on,
the light will turn on. The light will turn off when the surface
element(s) is turned off.
Hot Surface Lights
(glass-ceramic cooking surface
models only)
Each element has a hot /
..... __
surface indicator / _o_o_, '_,_I
light. A light will be t_:::--_ / ////_
illuminated when the _'_ _,_._
matching surface element is "'-_"__/
hot. It will remain on, even after the
control is turned off, until the area has
cooled. They are located at the front center of the cooktop.
Coil Element Surface
(select models)
Lift-up Porcelain Cooktop
Coil Elements
• When an element is turned on, it will cycle on and off
to maintain the heat setting.
• Coil elements are self-cleaning.
• Do not immerse in water.
To remove: When cool, raise element. Carefully pull out
and away from receptacle.
To replace: Insert terminals on the element into receptacle.
Guide the element into place. Gently press down on the outer
edge of the element until it sits level on the drip bowl.
TERMINALS
To prevent the cooktop from discoloring or staining:
• Clean cooktop after each use.
• Wipe acid or sugar spills as soon as the cooktop has
cooled as these spills may discolor or etch the
porcelain.
Your range features an upswept porcelain cooktop that can be
lifted up for convenient access to the area under the cooktop.
Drip Bowls
The drip bowls, located under each surface element, are
designed to catch boilovers and must always be used. Ab-
sence of these bowls during cooking may damage wiring or
other parts underneath the cooktop.
To prevent the risk of electric shock or fire, never line drip
bowls with aluminum foil.
To lift cooktop: When cool, grasp the front edge of the Drip bowls will discolor or craze over time, if overheated.
cooktop. Gently lift up until the two support rods at the front This discoloration or crazing is permanent. However, it will
of the cooktop snap into place, not affect cooking performance.
SUPPORT ROD
To lower cooktop: Hold the front edge of the cooktop and
carefully push back on each support rod to release. Then
gently lower the top into place. The support rods will slide
into the range frame.
To protect drip bowl finish:
• Avoid using high heat settings for long periods of time.
• Do not use oversized cookware. Pans should not
extend more than 1-2 inches beyond the element.
• When home canning, use the Canning Element (Model
CE1). Contact your Maytag dealer for details.
• Clean frequently. (See cleaning section, page 17.)