Philips LX9000R Addendum Manual page 57

2
3
4
5
You can set following personal user preferences on the
DVD recorder system:
-- _ Picture
- _ Language
- © Features
- _ Remote control settings
- _ Record settings
- _ Installation
User preferences
Picture
®®®
Switch yourTV set on. If necessary set the TV to the
correct audio/video channel, Such channels may be called
AUX or AUXILIARY IN, AUDIO/VIDEO orA/V IN, EXT1,
EXT2 or EXTERNAL IN, etc,These channels are often near
channel 00,
Press SYSTEM MENU on the remote control
•_ The system menu bar appears.
Press • on the remote control as often as necessary until
1'), is selected.
Press • on the remote control to confirm,
Press • or • on the remote control as often as necessary
until _ Picture is selected.
6
7
8
9
10
11
Press • on the remote control to confirm the selection.
Press •, • on the remote control as often as necessary to
select the desired function.
Press • on the remote control to confirm the selection.
Press •, • on the remote control as often as necessary to
select the desired setting, You can choose as follows:
TV shape
The picture signal from your DVD recorder system can be
set to match yourTV screen:
-_ 4:3 letterbox: for a wide-screen picture with black bars
_t the top and on the bottom
-_ 4:3 panscan: for a full-height picture with the sides
trimmed
,€ t 6:9: for a wide-screen TV s_t (screen edge ratio 16:9)
Black level shift
The colour dynamics for NTSC playback can be adjusted,
-_ On:The colour contrast during disc playback will be
improved,
-_ Off;The colour contrast during disc playback remains
unchanged,
Video shift
You can move the TV picture to the left or to the right to
suit yourTV screen, Use • or • on the remote control for
adjustment,
SCART video
By default the DVD recorder system is set to RGB. Select
S-Video if you want to connect an S-VHS recorde_
Press OK on the remote control to confirm the new selting.
Press • on the remote control to end.
55