Philips LX9000R Addendum Manual page 42

Recording
Safe record
When you start recording on a DVD+RW disc by pressing
RECORD on the DVD recorder system or REC/OTR on
the remote control once, a recording will be made from
the current position.To prevent this you can do a safe
record, which means starting the recording at the end of all
existing recordings.
Keep REC/OTR on the remote control pressed until
5rife f?EE£ is displayed,
•_ Recording starts st the end of all existing recordings.
Note;A new recording on a DVD+R disc w_llalways be added
at the end of all previous recordings as existing recordings
cannot be overwritten.
Recording with automatic stop
(OTR - One Touch Recording)
When you start recording, you can choose a certain
recording time, After this time has elapsed, your recording
will be stopped automatically.
Press REC/OTR on the remote control to start recording
from the current position,
•_ Recording starts.The actual recording time left is displayed,
Press REC/OTR on the remote control again to choose a
recording time of 30 minutes,
•_ Recording starts.The actual recording time left is displayed,
O To prolong the recording time, press REC/OTR again, Each
time you press REC/OTR, 30 minutes will be added.
•_ The actual recording time left is displayed,
O To cancel the set recording time, press CLEAR on the
remote control while the recording time is displayed,
3 After the chosen time has elapsed, recording stops
automatically,
Lining up recordings within a title -
assemble cut (DVD+RW discs only)
On a recorded DVD+RW, you can add a further recording
to an already existing title,The recording will be added to the
title as chapter(s). All existing recordings will be overwritten
from the chosen insert position onwards, Depending on the
length of the added recording, this can also overwrite titles
which follow the current title.The recording mode will be
automatically tal<en over from the current title,
oo5o
©®®
@@®
®® ®
| Load the appropriate DVD+RW disc.
2 Press DISC MENU on the remote control.
•_ The index picture screen appears.
3 Press • or • on the remote control as often as necessary
to select the desired title for adding a further recording,
4 Press 1_11 on the remote contralto start playback.
5 Press 1_11 again on the remote control during playback to
marl< where the new recording is to go,
•_ The shown still picture is the selected starting point,
6 Select the source from which you want to record.
7 Press RECORD on the DVD recorder system or REC/OTR
on the remote control to start inserting the new recording,
8 Press STOP• to stop recording,
40