Real Time Counter Memory - Philips VRX344AT Owner's Manual

Real T ime Counter Memory45
• oee• ee eo • •
oelee•*eeooeeeeoe••• •• •
Real Time Counter Memory
Follow the steps below to reset the real time counter to zero at a
tape location you want to refer to later.
I
Play, fast forward, or rewind a tape to the location that
you would like to refer to later. Press the STOP button to
stop the tape.
2
Press the STATUSIEXIT button. The status display will appear
on-screen for about five seconds.
CHI0
I :23:45
3
While the status display is still on-screen, press the CLEAR but-
ton to reset the real time counter to zero.
TOP 1:08 PM 1
CHI0
0:(30:00
4
While the real time counter is still on-screen, press the
MEMORY button so that M appears to the left of the real
time counter on-screen.
2
VCR ca_0ss _ulE
D@D ]
[][][]
......[][]
,'Em'ER
_ .... ®
SEARCH V_ SL_
©© ®
PHILIPS
I
3
/_TO P 1:08 PM 1
CHI0
',_P M 0:00:00
5
To go to a tape location where the real time counter was
reset to zero, press the REW(ind) button or the F.FWD
button when playback is stopped. When the tape reaches the
point at which the real time counter was reset to zero, the tape
will stop. Press the PLAY button to watch the tape.
Helpful Hints
The MEMORY button does not func-
tion when REPEAT PLAYis set to
ON. To turn REPEATPLAYOFF,see
the Helpful Hints on page 43.
To erase a Real Time Counter
Memory, press the MEMORY button
until the M disappears from the
screen.
Youmay only set the real time
counter to zero at one location at a
time. If you try to set the real time
counter to zero at a second loca-
tion, the previous real time counter
to zero setting will be erased.