Table of Contents
Advertisement
You can reset the real-time counter to zero at a tape location you
want to refer to later. Make sure:
The VCR is on and is in VCR position.The VCR/TV light will
appear. If it does not, press VCR/TV once.
There is a tape in the VCR.
1
Play, fast forward, or rewind a tape to the location that you
would like to refer to later. Press STOP to stop the tape.
2
Press CLEAR (repeatedly if necessary) to reset the
real-time counter to zero.
0 : 00 : 00
3
Press MEMORY so M appears on the screen beside
the real-time counter.
M 0 : 00 : 00
4
To go to a tape location where the counter was reset
to zero, press REW or F.FWD when play is stopped.
When the tape reaches zero, it will stop. Press PLAY to
watch the tape.
Real-Time Counter Memory 35
POWER
VCR/TV
PLAY
REW
STOP
STATUS
1
2
3
4
5
6
7
8
9
0
SPEED
SEARCH MODE STILL/PAUSE
REC
MEMORY
SLOW
3
Helpful Hints
• Set the counter memory at one
location at a time. Setting the
counter to zero at a second loca-
tion will erase the previous setting.
• To erase the counter memory,
press MEMORY repeatedly so the
M disappears from the screen.
• MEMORY does not function if
AUTO REPEAT is [ON].
See page 33.
1,4
EJECT
F.FWD
2
CH
Advertisement
Table of Contents
