Philips VRX344AT Owner's Manual page 16

16 Setting theClock (cont'd)
Automatic Clock Setting
I! SELECT NO. SHOWN
PUSH
PROGRAM
VCR SET UP
TUNER SET UP
SET CLOCK
END PUSH EXIT
I 5
Press theVCR button, then press the MENU button to
bring up the main menu display.
1
2
Press the Number 4 button to select SET CLOCK.
SET CLOCK
1
UTO CLOCK [ON]
El- MANUAL CLOCK
AYLIGHT SVG TIME [ON]
ET TIME ZONE
AUTO)
l CAB_._ BOX USERS
J SET CLOCK MANUALLY ]IF
TO SELECT PUSH
NO. SHOWN
O END PUSH EXIT
3 2
If OFF appears to the right of AUTO CLOCK, press the
Number I button once. A new display screen will appear. Go to
step 4. Or, if ON appears to the right of AUTO CLOCK,
press the Number I button twice. A new display screen will
appear. Go to step 4.
4
e If you want theVCR to locate a local PBS station from
which to take the time, press the Number I button to
select SET PBS CH.AUTO. When the current time appears
on-screen, you're finished. Press the STATUS/EXIT button to exit.
Or, you may be prompted to turn off theVCR. Press the STA-
TUS/EXIT button, then go to step 5.
NOTE: CANNOT FIND PBS CLOCK DATA may flash on-screen. In this
case, tell the VCR the PBS station from which to take the time.
® If you want to tell the VCR the PBS station from which
to take the time, press the Number 2 button to select
SET PBS CH. MANUAL, then use the Number buttons
to enter the channel number of the desired PBS station.
When the current time appears on-screen, you're finished. Press
the STATUS/EXIT button to exit.
NOTE: CANNOT FIND PBS CLOCK DATA may flash on-screen. In this
case, press the Number I button to choose SELECT NEW PBS CH.,
then use the Number buttons to enter the channel number of another
PBS station. Or, press the Number 2 button to select SET PBS CH.
AUTO. Press the STATUS/EXIT button, then go to step 5.
5
Turn off the VCR power, and leave it off for several min-
utes. When the current time appears on the VCR display panel, the
clock is set.You may turn on theVCR again.
I
PHILIPS
4
l-le_fui Hints
For Automatic Clock Setting
• If you enter an incorrect PBS chan-
nel number at step 4, press the
CLEAR button, then enter the cor-
rect channel number.
• If you have an antenna, you may
select channels 2 - 69 at step 4. If
you have a cable connection, you
may select channels I - 125.
• If you select SET PBS CH.AUTO at
step 4, you cannot manually select
the PBS channel from which you
want the VCR to take the time.
• The clock cannot be set automati-
cally if you don't receive a channel
that carries a time signal in your
area. Set the clock manually.
• If there are only a few channels in
your area that carry time "signals,
setting the clock automatically may
take several minutes. If nothing hap-
pens even after you wait several
minutes, set the clock manually.
• You cannot select AUTO CLOCK at
step 3 during tape playback.