Oven Light; Leveling Legs - Magic Chef CER1115AAT User Manual

Oven Door
Oven Light
To remove:
1. When cool, open the oven door to the
first stop position (opened about four
inches:).
2. Grasp door at each side. Do not use
the door handle to lift door.
3. Lift up evenly until door clears hinge arms.
To replace:
1. Grasp door at each side.
2. Align slots in the door with the hinge arms on the range.
3. Slide the door down onto the hinge arms until the door is
completely seated on the hinges. Push down on the top
corners of the door to completely seat door on hinges.
Door should not appear crooked.
Important: The oven door on a new range may feel
"spongy" when it is closed. This is normal and will decrease
with use.
Oven Window (select models)
To protect the oven door window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass.
2. Do not hit the glass with pots, pans, furniture, toys, or
other objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
To Replace Oven Light Bulb:
1. When oven is cool, hold bulb cover in place, then slide wire
retainer off cover.
Important: Bulb cover will fall if not held in place while removing
wire retainer.
2. Remove bulb cover and light bulb.
3. Replace with a 40-watt appliance
bulb.
4. Replace bulb cover and
secure with wire retainer.
5. Reconnect power to range.
Reset clock.
BULB COVER
RETAINER
Leveling Legs
Be sure the range is leveled when installed. If I_
('h
the range is not level, turn the leveling legs,
ILLJl
located at each corner of the range, until I _
\ LEVELING LEG