Magic Chef CER1115AAT User Manual page 10

Oven
did not clean properly (select models).
• Longer cleaning time may be needed.
• Excessive spillovers, especially sugary and/or acidic foods,
were not removed prior to the self-clean cycle.
Oven door will not unlock after self=clean cycle
[select models].
° Oven interior is still hot. Allow about one hour for the oven
to cool after the completion of a self-clean cycle, The door
can be opened when the LOCK is not displayed,
• The control and door may be locked, See page 14.
Moisture collects on oven window or steam comes from
oven vent.
• This is normal when cooking foods high in moisture.
° Excessive moisture was used when cleaning the window.
There is a strong odor or light smoke when oven is
turned on.
• This is normal for a new range and will disappear after a few
uses. Initiating a clean cycle will "burn off" the odors more
quickly.
• Turning on a ventilation fan will help remove the smoke
and/or odor.
• Excessive food soils on the oven bottom. Use a self-clean
cycle (select models].
Fault Codes (select models]
• BAKE or LOCK may flash rapidly in the display to alert you if
there is an error or a problem. If BAKE or LOCK appear in
the display, press CANCEL pad. If BAKE or LOCK continue
to flash, disconnect power to the appliance. Wait a few
minutes, and then reconnect power. If the flashing still
continues, disconnect power to the appliance and call an
authorized servicer.
• If the oven is heavily soiled, excessive fiareups may result in
a fault code during cleaning. Press the CANCEL pad and
allow the oven to cool completely, wipe out excess soil, then
reset the clean cycle. If the fault code reappears, contact an
authorized servicer.
Noises may be heard.
° The oven makes several low level noises. You may hear the
oven relays as they go on and off. This is normal.
° As the oven heats and cools, you may hear sounds of metal
parts expanding and contracting. This is normal and will not
damage your appliance.
There are no beeps and no display.
• Control may be in Sabbath Mode (select models]. See
page 17.
"SAb" flashing and then displayed continuously.
• Oven is in Sabbath Mode. To cancel, press and hold the
CLOCK pad for five seconds.
9