Advertisement
@@@@
@@
IN
Sanitizing
the Blender
For sanitizing the blender, use a sanitizing solution with a chlorine
concentration in the range of 100 to 200 parts-per-million. Such a
solution can be made by adding 1 tablespoon of chlorine bleach to
1 gallon of lukewarm water.
i Wash and rinse the blender jar, and clean the base, before sanitizing.
2 Fill the jar _Afull with sanitizing solution (approx. 5 cups). Place the
jar on the blender base and attach the lid.
Run the blender for 2 minutes at the High speed setting. (The Bar
Blender runs at the equivalent of High speed in the "On" position.)
Remove the blender jar and empty contents. Do not rinse with water.
4 Remove the ingredient cap from the lid. Immerse the lid and cap in
sanitizing solution for 2 minutes.
_) Let jar, ingredient cap, and lid air dry. Do not rinse with water.
Unplug the blender before sanitizing the base and cord.
Dampen a clean, soft cloth with sanitizing solution, and wipe the
base and cord thoroughly. Let base and cord air dry.
Advertisement
