Table of Contents
Advertisement
REMOVABLE
OVEN
RACKS
BUMPED-IN
RACK GUIDES
Be careful
not to scratch
the oven finish
when
installing
or removing
oven racks.
To install:
1. Set the raised back edge ofthe rack on a pair of rack
guides.
2. Push the rack In until you reach the bump In the rack
guide, then lift the front of the rack and push the rack
all the way In.
TO remove:
1. Pull the oven rack out, then up.
NOTE:
The racks
are designed
with
stop locks.
When
the racks
are placed
correctly
on the rack
sup-
port and extended
from the oven,
the stop lock
prevents
the
racks
from
tilting
when
you are
removing
food from the racks
or placing
food on
them.
REMOVABLE
OVEN
DOOR
STOP (BROIL) POSITION
HINGE
To remove:
1. Open the door to the stop position (see Illustration).
2. Grasp the door at each side and ='ft up and off the
hinges. DO NOT lift the door by the handle.
NOTE:
When the door is removed
and hinge arms
are at stop position,
do not bump or try to move
the
hinge
arms.
The
hinges
could
snap
back
causing
an injury
to the hands or damage
to the
porcelain
on the front
of the range.
Cover
the
hinges
with toweling
or empty
towel
rolls while
working
in the oven area.
To replace:
1. Hold the door over the hinges with the slots at the
bottom edge of the door lined up with the hinges,
The
hinge
arms
must
still
he
in the
stop
position,
2. Slide the door down onto the hinges as far as It will
go and close the door.
REMOVABLE
STORAGE
DRAWER
I
/
!
lJ
GUIDE STOP
This
drawer
gives
you
space
for
keeping
cookware
and bakeware.
Plastics
and flammable
material
should
not be kept
in this drawer.
Do not overload the storage drawer. If the drawer is too
heavy, It may slip off the track when opened. To open the
drawer, grasp the center of the handle and pull straight
Out.
To remove:
Pull drawer straight out and lift over the
guide stops,
To replace:
Lift over the guide stops and slide drawer
into place.
13
NEMNT94
Advertisement
Table of Contents
