Advertisement
Available languages
Available languages
Changing
Cooktop
and/or
Oven Lights
(some models)
Be sure the range is unplugged
and all parts are COOL before
replacing the oven light, Wear a leather-faced
glove for protection
against
possible broken glass,
To Ci_ange the Oven Light (some models)
On some models, the oven light automatically
turns on when
the door is
opened. Some models have a switch located on the control
panel
to turn
on the light. The oven light is located at the iear of the oven and is covered
with a glass shield held by a wire holder, The glass shield must
be in place
whenever' the oven is in use
• •....
To replace the oven Eight:
1.
Turn electrical power off at the main source or unplug the
range,
2.
Press wire holder to one side to release the glass shield.
3.
Replace bulb with a new 40 watt appliance bulb.
4_ Replace glass shietd over bulb and snap wire holder' into
pface_
5
Turn power back on again at the main source (or plug the
range back
in)
6.
The clock(if equipped) w:ilLth,en.need to be reset_ To reset,
see Setting
the Clock and Minute Tirne;i: i_q'_hisOwner's Guide
Adjusting
Oven
Temperature
Note: The adjustments
made will not i
change the self-cleaning
temperature
J
The temperature
control in the oven has been set at the factory_
When first
using the oven, be sure to follow recipe times and temperatures.
If you
think the oven is too hot or too cool, the temperature
in the oven
can be
adjusted, Before adjusting, test a recipe by using a temperature
setting that
is higher or lower than the recommended
temperature
The baking
results
should help you to decide how much of an adjustment
is needed.
To Adjust Oven Temperature:
1.
Push _.
2.
Set the temperature
to 550°F (287°C) by pushing and holding
the (_,
3.
Within 2 seconds, push and hold _
until the special 2 digit
display
4
5
appears. Release _.
The display now indicates the amount
of
degrees offset between the original factory temperature
setting
and the
current temperature
setting
If the oven control has the original
factory
calibration,
the display will read "00)'
The temperature
can now be adjusted up or down 35°F (1 7°C), in 5%
(1°C) steps, by pushing and holding the (_
or (_.
Adjust
until the
desired amount
of offset appears in the display
When you have made the desired adjustment,
push _}
to go back to
the time of day display When adjusting oven temperature,
a minus
sign (-) wilt appear before the number to indicate that the
oven will be
cooler by the displayed amount of degrees.
20
Advertisement
