Registering A Local Site - Panasonic KX-VC300 User Manual

Registering a Local Site

1.
Press [Menu].
•
The Menu screen is displayed.
2.
Use [ ][ ] to select "Select local site" and
press [Enter].
•
The select local site screen is displayed.
3.
Use [ ][ ] to select "Not Registered" and press
[B].
•
The local site settings screen is displayed.
4.
Use [ ][ ] to select the following items for input:
"Connection mode": Press [Enter] and use [
[ ] to select "NAT Traversal Mode".
"Local site name": Enter a name for the local site.
"Max. Bandwidth": Press [Enter] and use [
[ ] to select the maximum allowed bandwidth to
be used (512 kbps, 768 kbps, 1.0 Mbps,
1.2 Mbps, 1.5 Mbps, 2.0 Mbps, 2.5 Mbps,
3.0 Mbps, 3.5 Mbps, 4.0 Mbps, 4.5 Mbps,
5.0 Mbps, 5.5 Mbps, 6.0 Mbps, 6.5 Mbps,
7.0 Mbps, 7.5 Mbps, 8.0 Mbps, 8.5 Mbps,
9.0 Mbps [default], 10.0 Mbps).
Note
•
The maximum bandwidth during a video
conference call adjusts to that of the party
that has set the lowest bandwidth for the
maximum bandwidth setting among all
participating parties.
•
You cannot select a value that is higher than
the maximum bandwidth set by the dealer.
For details, contact your dealer.
•
When you make a 3-party video conference
call, select a value of "1.0 Mbps" or higher.
Document Version 2012-03
Setting up KX-VC Series NAT Traversal Service
Otherwise, the image quality and the sound
quality cannot be guaranteed.
•
When you make a 4-party video conference
call, select a value of "1.5 Mbps" or higher.
Otherwise, the image quality and the sound
quality cannot be guaranteed.
"Encryption": Use [
Note
•
You cannot have an encrypted video
conference call with a party with different
encryption settings.
"Encryption Key": Enter an encryption key (4 to
256 characters [alphanumeric, space, symbols]).
Note
•
&, <, >, comma (,), double quotation mark
(") cannot be entered.
•
While being entered, the characters of the
encryption key are displayed, but once the
settings are saved, all the characters will be
displayed as asterisks (*), and you will no
longer be able to check the encryption key
on the screen. Record the encryption key
beforehand, and store it in a safe location.
•
If the value specified in "Encryption Key"
does not match the other party's, the video
conference call will not start even if
encryption is enabled.
•
When the encryption key is displayed as
]
asterisks (*), pressing [Y] deletes the entire
encryption key.
"Video Quality": Use [
]
prioritising smooth movement or image quality for
video.
–
"Motion" (default): Prioritise smooth
movement.
–
"Sharpness": Prioritise image quality.
Note
•
If you are using the KX-VC300,
"Sharpness" can only be selected after
purchasing an activation key card
(KX-VCS401) to enable sending images in
Full HD resolution. For details, contact your
dealer.
•
If one of the other parties is using an older
software version, "Motion" will be selected.
•
If "Max Resolution" is set to "HD", and
"Video Quality" is changed from
"Motion" to "Sharpness", the setting for
"Max Resolution" is automatically
changed to "Auto".
][ ] to select "ON".
][ ] to select between
NAT Traversal Service User's Guide 19