Panasonic KX-VC300 User Manual page 26

Using KX-VC Series NAT Traversal Service
Calling by Entering a Terminal ID
You can make a video conference call by entering the Terminal ID (7 digits) of the party you want to call.
1 Press [Menu].
•
The Menu screen is displayed.
2
Select "Manual Dial" using [
[Enter].
•
The input screen is displayed.
3
Select "Multi-Point" using [
4
Select one of the following values using [
2-party video conference call: "No"
3-party video conference call: "2 sites"
4-party video conference call: "3 sites"
Note
•
If you are using the KX-VC300, inputting 2 or 3
sites is only available after purchasing an
activation key card (KX-VCS301) to activate
multiple-party video conference calls. For details
about the activation key, contact your dealer.
5
Use [ ][ ] to select "Site 1", "Site 2" or "Site 3".
6 Enter the Terminal ID (7 digits).
Note
•
You can refer to the contact list when entering
the Terminal ID, by following the procedure
below:
1.
Press [G].
•
2.
Use [
to refer to.
•
3.
Press [Enter].
•
•
26 NAT Traversal Service User's Guide
][ ] and press
][ ].
The contact list screen is displayed.
][ ] to select the contact you want
You can use [ ][ ] or the numeric
buttons of the remote control to select
the displayed tab (Page 28).
The display returns to the input screen.
You cannot enter the Terminal ID using
the call history.
2-5
][ ].
1
7
6
Document Version 2012-03
8