Panasonic KX-VC300 User Manual page 9

3.
Fill in the following items:
"MPR ID"
"Activation Key No."
"Registration ID"
4.
Click "Next".
•
The Terms of Use screen is displayed.
5.
Read the Terms of Use thoroughly, and if you agree
to the terms, click "Accept".
•
The Terminal ID selection screen is displayed.
6.
Select the Terminal ID you want to use, and then
click "Next".
•
The information confirmation screen is
displayed.
Note
•
Clicking "Click to Show next Terminal
IDs" displays more Terminal IDs available
for use. You can repeat this operation up to
5 times. Once you click "Click to Show
next Terminal IDs", Terminal IDs that have
been displayed up to that point cannot be
recalled.
Document Version 2012-03
Setting up KX-VC Series NAT Traversal Service
7.
Click "Register".
•
The application complete screen is displayed.
The value displayed on the screen in
"Registration Key" (16 characters) must be
registered to the unit. Make a printout of the
page or write down the Registration Key on the
Activation Key Sheet or another piece of paper
and store it in a safe place.
IMPORTANT
•
If you misplace the Registration Key
information, refer to "To display the
Registration Key again (using a
computer)".
8.
Click "Finish".
•
The completion screen is displayed.
NAT Traversal Service User's Guide 9