Panasonic KX-VC500 Operating Manual page 100

Contacts and Settings
2.
Use [ ][ ] to select "SIP Settings" and press
[Enter].
•
The SIP setting screen is displayed.
3.
Use [ ][ ] to select the following items for input:
"SIP Server": Use [
"OFF" (default).
Note
•
To communicate using a SIP server, "ON"
must be selected and "SIP Server
Address", "SIP Username", and "SIP
Domain Name" must be set.
"SIP Server Address": Enter the SIP server's IP
address.
Note
•
If the IP address contains 1 or 2 digit
numbers, enter these numbers as they are.
Do not enter like [.001].
Example: The IP address is [192.168.0.1].
–
Correct entry: [192.168.0.1]
–
Wrong entry: [192.168.000.001]
"SIP Username": Enter the SIP user name.
Alphanumeric characters and the symbols . = * + _
- $ ! ? / ' ( ) can be entered (up to 60 characters).
"SIP Domain Name": Enter the SIP domain name.
Alphanumeric characters and the symbols . and -
can be entered (up to 128 characters).
Note
•
Enter an RFC-compliant value. For details,
contact your network administrator.
"Digest Authentication": Use [
whether to enable digest authentication.
–
"ON": Enables digest authentication.
–
"OFF" (default): Disables digest authentication.
100 User Manual
][ ] to select "ON" or
][ ] to select
"Authentication ID": Enter an authentication ID
(1–60 characters [alphanumeric, space, symbols])
(Page 110). &, <, >, comma (,), double quotation
mark (") cannot be entered.
"Authentication Password": Enter an
authentication password (0–60 characters
[alphanumeric, space, symbols]) (Page 110). &, <,
>, comma (,), double quotation mark (") cannot be
entered.
Note
•
To communicate using a SIP server, "ON"
must be selected and "SIP Server
Address", "SIP Username", and "SIP
Domain Name" must be set. For details,
contact your network administrator.
•
"Authentication ID" and "Authentication
Password" can only be set when "Digest
Authentication" is set to "ON".
•
While being entered, the characters of the
authentication password are displayed, but
once the settings are saved, all the
characters will be displayed as asterisks (*),
and you will no longer be able to check the
authentication password on the screen.
Record the authentication password
beforehand, and store it in a safe location.
•
When the authentication password is
displayed as asterisks (*), pressing [Y]
deletes the entire authentication password.
"SIP Transport Protocol": Use [
between protocols (UDP, TCP, or Auto [default])
used when communicating via SIP.
Note
•
When "Auto" is selected, if using a SIP
server, TCP will be used for
communication, and if using an IP address
or MCU's conference room number@IP
address, UDP will be used for
communication. Normally, select "Auto".
4.
Press [G].
•
A dialogue box to confirm the saving of settings
is displayed.
5.
Use [ ][ ] to select "Yes" and press [Enter].
•
The admin menu screen is displayed.
6.
Press [Home].
•
The Home screen is displayed.
][ ] to select