Displaying The Connection Status - Panasonic KX-VC500 User Manual

Displaying the Connection Status

Displaying the Connection Status

You can confirm the connection status of the network and peripheral devices.
1 Press [Status].
•
The connections status screen is displayed. An
"X" mark is displayed next to any network or
peripheral devices connection that is not in normal
operation or not connected.
Example: The Boundary Microphone connection is
not normally operating.
•
"MIC" displays the connection status of the
Boundary Microphone only. The connection status
of general-purpose microphones is not displayed.
•
If the MIC detection setting has been disabled
through system settings, the connection status of the
Boundary Microphone will not be displayed.
(Page 64)
2 Press [Back].
•
The display returns to the screen in use before the
connections status screen was viewed.
56 User Manual
1
2