Table of Contents
Advertisement
6 Settings and Confirmation
6.3 Displaying the
Connection Status
You can confirm the connection status of the network
and peripheral devices.
1.
Press [Status].
•
The connections status screen is displayed. An
"X" mark is displayed next to any network or
peripheral devices connection that is not in
normal operation or not connected.
Example: The Boundary Microphone connection is
not normally operating.
•
"MIC" displays the connection status of the
Boundary Microphone or headset only. The
connection status of general-purpose
microphones is not displayed.
•
If the MIC detection setting has been disabled
through system settings, the connection status
of the Boundary Microphone or headset will not
be displayed. For details on how to change MIC
detection settings, refer to the User Manual.
2.
Press [Back].
•
The display returns to the screen in use before
the connections status screen was viewed.
34
Installation Manual
Advertisement
Table of Contents
