Automatic Darning - Pfaff creative 7560 Instruction Book

Automatic darning
Program 24
This program is used mainly for strengthening
damaged areas of fabric.
• Stitch over the damaged area at the required
length.
• Press the reverse key; the machine finishes
sewing the darning program and the darning
length is thus saved.
Depending on the type of material, the darning
pattern may shift to one side. You can straighten
the pattern again using the ,,balanc&' function
(see ,,balance" section).
Fig. 1: If the pattern shifts this way you have to
correct the balance in the plus-section.
Fig. 2: If the pattern shifts this way you have to
correct the balance in the minus-section.
The saved darning length can now be repeated as
often as needed.
This will be deleted, if you:
• Enter a new length by pressing the reverse key.
• Select a new program
• Switch off the machine
• Press the key
,, "
(pattern start)
qiiij
1111111
11111
1
iiIII
ULjj
1
2
75