Extron electronics Architectural Series Universal Interfaces with Audio and ADSP RGB 500/Dual User Manual page 18

This light gray area represents where the
interface enclosure (2.50" H x 3.70" W) will be
located against the rear of the RGB 500 Dual,
RGB 508, RGB 560 Dual or RGB 568 front panel.
The dashed line indicates the recommended
cut-out area (3.875" H x 7.525" W)
for the installation surface.
RGB 500 Dual, RGB 508, RGB 560 Dual and RGB 568
Rough-in Template
Use this template as a guide for cutting the hole in the installation surface (wall or
furniture) for the interfaces with a 4-gang size faceplate. This diagram is actual
size.
This light gray area represents where the
second interface enclosure (2.50" H x 3.70" W)
will be located against the rear of the
RGB 500 Dual or RGB 560 Dual front panel.
The solid, outer line (4.50" H x8.325" W)
represents the outside edge
of the wall mounting bracket.