Changing The Needle Plate; Replacement; Cleaning And Lubricating; Cleaning The Display - Pfaff creative 7570 Instruction Book

Changing the needle plate
3
• Switch off the master switch.
• Raise the sewing foot lifter.
• Pull the needle plate upwards at the back and
j
remove
it.
Replacement
3
• Lay the back of the needle plate down flat and
push it down at the front until you hear it snap
into place.
Before you start sewing, check that the needle
plate is lying flat.
—
Cleaning and lubricating
• Switch off the master switch.
• Remove the needle plate and lower the feed
dog.
• Clean the feed dog and hook area with the
brush.
• Apply one drop of oil only to the hook as
shown above. The machine is otherwise main
tenance free and must not be oiled in other
places.
• Clean and oil the sewing machine every 10 to
15 hours of operation.
Cleaning the display
When needed, clean the display. using a dry, soft,
lint-free cloth. Do not use chemical cleaners or
solvents!
157