Pfaff creative 7570 Instruction Book page 196

•0
II
Ii
Plug the mains cord into the foot pedal and switch
the machine on at the on/off switch.
Open the swivel arm, followed by the hook flap and
then lower the feed dog (see 7570 page 37).
rrax
Take care that the swivel arm is not swung too far
to the rear. Otherwise the embroidery unit could be
pushed out of its connection bushing.
The maximum angle of the swivel arm should not
exceed 90°
I
I
I
I
Slide an embroidery-pattern memory card into the
slot in the base plate. The card is to be pushed into
the slot as far as it will go. The release button
springs out approx. 1/2 cm when the card is
inserted properly.
To remove the memory card push the release
button next to the slot.
9